|
|
Two operating modes: bi-level and CPAP |
| |
Operating pressure 3-25 cm H2O in increments of 0.5 cm H2O |
| |
22 cm H2O IPAP/EPAP maximum delta |
| |
Inspiration pressure range EPAP to 25 cm H2O in increments of 0.5 cm H2O |
| |
Expiration pressure range 3 cm H2O to IPAP in increments of 0.5 cm H2O |
| |
Pressure accuracy ± 0.5 cm H2O |
| |
Provider activated patient adjustable delay time |
| |
Starting delay pressure 3 cm H2O to EPAP in increments of 0.5 cm H2O |
| |
Easy push-button setup - no remote or manometer required |
| |
On/off button, delay button, backlit LCD display (auto time-out after 60 seconds inactivity) |
| |
Lifetime hour meter, while breathing compliance meter and compliance bar graph |
| |
Actual pressure is displayed on the LCD |
| |
Serial interface that facilitates: LT Software setup, PDA remote control module, IPS/eCompliance, ABOB and firmware updates |
| |
Inspiration and expiration fluctuations ± 0.25 cm H2O (< 10 cm H2O) |
| |
Quiet operation, lightweight at 3.6 lbs |
| |
Analog outputs using optional analog breakout box (ABOB) for Sleep Lab use |
| |
IPAP/EPAP rounding |
| |
Delay time: 0-45 minutes in 5 minute increments |
| |
Automatic trigger sensitivity |
| |
Universal power supply (100-240 VAC, 50/60 Hz; 120 VAC, 400 Hz) |
| |
Automatic leak compensation (up to 80 lpm) |
| |
Pressure transducer for no-manometer setup and altitude compensation |
| |
Automatic on/off, detects breathing and starts blower, detects mask off and turns blower off |
| |
Mask off alert with keypad silence (any keypad button) |
| |
On-board compliance logging |
| |
On-board Epworth Sleepiness Scale Questionnaire logging |
| |
Snoring and exhale puff detection for analog outputs and performance logging |
| |
Manufacturer's limited 2-year warranty |
